Peripheral 30cm power extension cable (Molex HDD + SATA) Discontinued | |
More variations available Show |
picoPSU Peripheral 30cm power extension cable (Molex HDD + SATA)
This cable allows one extra SATA drive and one extra HDD (4-pin Molex) to be connected to a picoPSU.
This cable is designed to attach to the spare header pins on a picoPSU and will allow you to power an additional 2.5”/3.5” SATA SSD/HDD and/or 3.5” HDD with 4-pin Molex connector.Features
- Allows two extra drives to be connected to a picoPSU
- Designed to work with the picoPSU second output header
- Useful for multi-drive small form factor PCs
- Total approximate cable length 30cm
Specifications | PicoPSU Ext Cable |
---|---|
Part code | picoPSU-150-XT peripheral extension cable |
Connectors | 1 x Molex HDD, 1 x SATA |
Cable length from header to Molex | 230mm (end-to-end) |
Cable length from Molex to SATA | 142mm (end-to-end) |
Total approximate cable length | 300mm |
Warranty | 24 months |
Specifications | PicoPSU Ext Cable |
---|---|
Part code | picoPSU-150-XT peripheral extension cable |
Connectors | 1 x Molex HDD, 1 x SATA |
Cable length from header to Molex | 230mm (end-to-end) |
Cable length from Molex to SATA | 142mm (end-to-end) |
Total approximate cable length | 300mm |
Warranty | 24 months |
Top Cables and adapters
Quiet PC IEC C13 UK Mains Power Cord, 1m (Type G)
CA$ 8.01
Gelid PWM Adaptor Cable for VGA Cooler Fans
CA$ 2.27
Gelid PWM Y Cable, Connect two PWM fans to one socket
CA$ 3.62
Quiet PC Cloverleaf C5 UK Mains Power Cord, 1.8m (Type G)
CA$ 8.01
Quiet PC IEC C13 Euro Mains Power Cord, 2m (Type F)
CA$ 8.01
Streacom RZ4 PCIe Gen4 Riser Cable
CA$ 85.64 CA$ 69.18
Gelid 3-pin Fan Resistor Cable
CA$ 2.12
Noctua NA-SEC1 4-Pin PWM Fan Extension Cables, 3 pack
CA$ 13.52
Quiet PC Cloverleaf C5 Euro Mains Power Cord, 0.6m (Type F)
CA$ 8.01
Gelid 1-to-4 RGB Splitter Cable
CA$ 3.62